modula-2 home

  Home  
  Tutorial  
  Win32 API  
  Reference  
  Projects  
 

 
DEFINITION MODULE IOChan;
  
  (* Types and procedures forming the interface to channels for device-independent data
     transfer modules
  *)
  
IMPORT IOConsts, ChanConsts, SYSTEM;
  
TYPE
  ChanId; (* Values of this type are used to identify channels *)
  
  (* There is one distinguished value identifying an invalid channel on which no data transfer
     operations are available.  It may be used to initialize variables of type ChanId.
  *)
  
PROCEDURE InvalidChan (): ChanId;
  (* Returns the value identifying the invalid channel. *)
  
  (* For each of the following operations, if the device supports the operation on the
     channel, the behaviour of the procedure conforms with the description below.  The full
     behaviour is defined for each device module.  If the device does not support the
     operation on the channel, the behaviour of the procedure is to raise the exception
     notAvailable.
  *)
   
  (* Text operations - these perform any required translation between the internal and
     external representation of text.
  *)
  
PROCEDURE Look (cid: ChanId; VAR ch: CHAR; VAR res: IOConsts.ReadResults);
  (* If there is a character as the next item in the input stream cid, assigns its value to
     ch without removing it from the stream; otherwise the value of ch is not defined.  res
     (and the stored read result) are set to the value allRight, endOfLine, or endOfInput.
  *)
  
PROCEDURE Skip (cid: ChanId);
  (* If the input stream cid has ended, the exception skipAtEnd is raised; otherwise the
     next character or line mark in cid is removed, and the stored read result is set to the
     value allRight.
  *)
  
PROCEDURE SkipLook (cid: ChanId; VAR ch: CHAR; VAR res: IOConsts.ReadResults);
  (* If the input stream cid has ended, the exception skipAtEnd is raised; otherwise the
     next character or line mark in cid is removed.  If there is a character as the next
     item in cid stream, assigns its value to ch without removing it from the stream.
     Otherwise, the value of ch is not defined.  res (and the stored read result) are set to
     the value allRight, endOfLine, or endOfInput.
  *)
 
PROCEDURE WriteLn (cid: ChanId);
  (* Writes a line mark over the channel cid. *)
  
PROCEDURE TextRead (cid: ChanId; to: SYSTEM.ADDRESS; maxChars: CARDINAL;
                    VAR charsRead: CARDINAL);
  (* Reads at most maxChars characters from the current line in cid, and assigns
     corresponding values to successive components of an ARRAY OF CHAR variable for which
     the address of the first component is to. The number of characters read is assigned
     to charsRead. The stored read result is set to allRight, endOfLine, or endOfInput.
  *)
 
PROCEDURE TextWrite (cid: ChanId; from: SYSTEM.ADDRESS; charsToWrite: CARDINAL);
  (* Writes a number of characters given by the value of charsToWrite, from successive
     components of an ARRAY OF CHAR variable for which the address of the first component
     is from, to the channel cid.
  *)
  
  (* Direct raw operations  - these do not effect translation between the internal and
     external representation of data
  *)
  
PROCEDURE RawRead (cid: ChanId; to: SYSTEM.ADDRESS; maxLocs: CARDINAL;
                   VAR locsRead: CARDINAL);
  (* Reads at most maxLocs items from cid, and assigns corresponding values to successive
     components of an ARRAY OF LOC variable for which the address of the first component
     is to. The number of items read is assigned to locsRead. The stored read result
     is set to the value allRight, or endOfInput.
  *)
  
PROCEDURE RawWrite (cid: ChanId; from: SYSTEM.ADDRESS; locsToWrite: CARDINAL);
  (* Writes a number of items given by the value of locsToWrite, from successive
     components of an ARRAY OF LOC variable for which the address of the first component
     is from, to the channel cid.
  *)
  
  (* Common operations *)
  
PROCEDURE GetName (cid: ChanId; VAR s: ARRAY OF CHAR);
  (* Copies to s a name associated with the channel cid, possibly truncated
     (depending on the capacity of s).
  *)
  
PROCEDURE Reset (cid: ChanId);
  (* Resets the channel cid to a state defined by the device module. *)
  
PROCEDURE Flush (cid: ChanId);
  (* Flushes any data buffered by the device module out to the channel cid. *)
  
  (* Access to read results *)
  
PROCEDURE SetReadResult (cid: ChanId; res: IOConsts.ReadResults);
  (* Sets the read result value for the channel cid to the value res. *)
  
PROCEDURE ReadResult (cid: ChanId): IOConsts.ReadResults;
  (* Returns the stored read result value for the channel cid. (This is initially the value
     notKnown).
  *)
 
  (* Users can discover which flags actually apply to a channel *)
  
PROCEDURE CurrentFlags (cid: ChanId): ChanConsts.FlagSet;
  (* Returns the set of flags that currently apply to the channel cid. *)
 
  (* The following exceptions are defined for this module and its clients *)
  
TYPE
  ChanExceptions =
    (wrongDevice,      (* device specific operation on wrong device *)
     notAvailable,     (* operation attempted that is not available on that channel *)
     skipAtEnd,        (* attempt to skip data from a stream that has ended *)
     softDeviceError,  (* device specific recoverable error *)
     hardDeviceError,  (* device specific non-recoverable error *)
     textParseError,   (* input data does not correspond to a character or line mark -
                          optional detection *)
     notAChannel       (* given value does not identify a channel - optional detection *)
    );
  
PROCEDURE IsChanException (): BOOLEAN;
  (* Returns TRUE if the current coroutine is in the exceptional execution state
     because of the raising of an exception from ChanExceptions;
     otherwise returns FALSE.
  *)
 
PROCEDURE ChanException (): ChanExceptions;
  (* If the current coroutine is in the exceptional execution state because of the
     raising of an exception from ChanExceptions, returns the corresponding
     enumeration value, and otherwise raises an exception.
  *)
 
  (* When a device procedure detects a device error, it raises the exception softDeviceError
     or hardDeviceError.  If these exceptions are handled, the following facilities may be
     used to discover an implementation-defined error number for the channel.
  *)
  
TYPE
  DeviceErrNum = INTEGER;
  
PROCEDURE DeviceError (cid: ChanId): DeviceErrNum;
  (* If a device error exception has been raised for the channel cid, returns the error
     number stored by the device module.
  *)
  
END IOChan.